Home Products Butterfly ValvesFluorine-Lined Butterfly Valve

Fluorine-Lined Butterfly Valve

Core Structure

• Generally a center-line soft-seal structure

• The valve body is entirely lined with a layer of F4 (PTFE), F46, PO, etc.

• The butterfly plate is also PTFE-lined

• The valve stem is usually made of stainless steel to prevent media corrosion

• Connections are mainly wafer type and flange type

• Drive methods are mainly handle, turbine, electric, and pneumatic

Commonly Used PTFE Lining Materials

• PTFE (Polytetrafluoroethylene/Teflon) Resistant to strong acids and alkalis, high temperature, and almost all chemicals

• FEP (F46) Better processability, corrosion resistance close to PTFE

• PFA High temperature resistance, stronger corrosion resistance, higher price

• PO/Polyolefin High cost-performance ratio, suitable for general corrosive conditions

Online Inquiry Contact Us

Product Description

Product Advantages

• Superior corrosion resistance: Resistant to sulfuric acid, hydrochloric acid, nitric acid, hydrofluoric acid, strong alkalis, organic solvents, etc.

• Reliable sealing, virtually zero leakage

• No scaling or media adhesion, smooth flow path

• Wide applicable temperature range: -50℃～180℃

• Significantly lower cost compared to stainless steel and Hastelloy valves

Applicable Media

• Strong acids: Sulfuric acid, hydrochloric acid, nitric acid, hydrofluoric acid, phosphoric acid

• Strong alkalis: Liquid alkali, sodium hydroxide, potassium hydroxide

• Various organic solvents, brine, corrosive wastewater

• Electroplating, pickling, pesticides, chemical synthesis media

Not suitable for: High-temperature steam, slurries containing hard particles, highly abrasive conditions

Online Inquiry

Submit

Related Products

Butt Welded Butterfly Valve

Structural Features

• No flanges or clamps; valve body directly welded to the pipeline.

• High overall rigidity, completely eliminating leakage at the connection surface.

• Mostly triple eccentric metal hard seal structure.

• Reliable seat seal, capable of bidirectional pressure resistance.

Advantages

• Zero external leakage: welded connection, no risk of gasket leakage.

• Resistant to high temperatures, high pressures, and vibrations, suitable for harsh working conditions.

• Smaller and lighter than flanged types.

• Long service life, requiring almost no maintenance at the connection.

Wafer Butterfly Valve

Structural Features

• Ultra-thin, compact, and lightweight valve body

• No built-in flange; clamped to the pipe flange via double-ended bolts passing through the valve body

• On/off or regulation via rotation from 0° to 90°

Advantages

• Small size and light weight, easy installation

• Low cost, cheaper than flanged valves

• Small footprint, suitable for compact piping

• Quick opening and closing, effortless operation

Triple Offset Butterfly Valve

What do the three eccentricities refer to?

1. Valve stem axis is off-center from valve body center

2. Valve stem axis is off-center from sealing surface center

3. Sealing cone axis is tilted at an angle

Core effects:

• Almost no friction between the disc and valve seat during opening and closing

• The sealing surface tightens as it closes, resulting in minimal wear on the sealing surface

Centerline Rubber-Lined Butterfly Valve

Structural Features

• Centerline Structure: The valve stem axis, butterfly plate center, and valve body center are on the same centerline.

• Integral Rubber Lining: The entire valve body interior and butterfly plate outer ring are covered with rubber.

• Fully Soft Seal: Sealing is achieved through rubber elasticity; a seal is achieved when the valve is fully closed.

• Connection Methods: Wafer type, flange type

• Drive Methods: Handle, turbine, pneumatic, electric



+86 19858780995

+86 19858780995

+86 19858780995

+86 19858780995

19858780995@163.com

