Butt Welded Globe Valve, High Pressure Weld End Globe Valve for Power Plant Factory supply-Wenzhou Keton Valve Co., Ltd.

Globe Valve

Working Principle: The medium flows in from below the valve seat, passes through the throttling gap between the valve disc and the valve seat, and flows out from the outlet. The valve disc stroke is controlled by the rise and fall of the valve stem, changing the flow cross-sectional area to achieve both shut-off and throttling. When closed, the axial pressure of the valve stem presses against the sealing surface to achieve a tight seal.

Structural Features:
1. Unidirectional Flow: Medium enters from a lower position and exits from a higher position; cannot be installed in reverse, requiring directional control during installation.

2. Good Sealing Performance: Plane/conical surface seal, tight closure, low leakage.

3. Excellent Throttling Performance: Controllable stroke, suitable for small-amplitude pressure and flow adjustment.

4. Relatively High Flow Resistance: S-shaped flow path in the pipeline, resistance coefficient higher than gate valves and ball valves.

5. Short opening and closing stroke, simple structure, convenient maintenance and replacement of parts.

Forged Steel Gate Valve

Basic Structure A forged steel gate valve is a valve in which the closing element (gate) moves perpendicular to the centerline of the flow path. Its opening and closing element is the gate, and its movement direction is perpendicular to the fluid direction. It is typically used only for fully open or fully closed applications and does not have regulating or throttling functions.

The gate of a forged steel gate valve usually has two sealing surfaces. The most common type of gate valve has a wedge-shaped sealing surface, and the wedge angle varies depending on the valve parameters.

Check Valve

Working Principle: When the medium flows in the forward direction, the fluid pressure opens the valve disc/valve core, allowing the valve to open. When the medium flows in the reverse direction or the pressure reverses, the valve automatically closes and seals itself due to its own weight and the pressure of the reverse medium, completely blocking backflow without manual or electrical control.

Main Classifications and Structures:
1. Swing Check Valve: The valve disc swings around a pin. Commonly used in large-diameter applications, it has low flow resistance and smooth passage, suitable for water, steam, and oil.

2. Lift Check Valve: The valve disc moves vertically up and down along the valve stem, providing better sealing performance. Often used in small-diameter, high-pressure applications.

3. Wafer Check Valve: Ultra-thin structure, small size, low cost. It is clamped between two flanges for easy installation.

4. Butterfly Double-Disc Check Valve: Double-disc structure, sensitive opening and closing, good buffering, suitable for large-diameter water supply and drainage, and industrial pipelines.

5. Silent Check Valve: With a buffer structure, it reduces water hammer and noise. Commonly used in buildings and pump rooms.

Welding Globe Valve

Main Performance Parameters

• Nominal Pressure: PN16～PN160, complete high-pressure series

• Nominal Diameter: DN15～DN300

• Operating Temperature: -29℃～+425℃ (carbon steel); stainless steel and alloy steel are suitable for high-temperature conditions above 600℃

• Connection Method: Butt welding (BW), socket welding (SW), flangeless connection

• Sealing Form: Hard alloy seal, weld overlay seal, high sealing level, pressure and high temperature resistance

Structural Forms

1. Straight-through welded gate valve: Conventional and universal structure, widely applicable to most process pipelines.

2. Angle welded gate valve: 90° inlet and outlet layout, suitable for pipeline bends and compact equipment interface installation positions.

3. Y-type direct-flow welded gate valve: Smooth flow path, lower flow resistance, reducing media resistance and scouring losses.

Welding Globe Valve

Product Description

Online Inquiry

Related Products

Globe Valve

Forged Steel Gate Valve

Check Valve

Welding Globe Valve